Actiontec M1000

Modem Setup

  1. After the computer is connected to the M1000 DSL modem, open a Web browser (e.g., Internet Explorer, Firefox) and enter in the Address field. Press Enter/Return on the keyboard.
    image of Browser

  2. Click the Quick Setup tab. Enter the PPP User Name and Password provided by OlympusNet, and click Apply. Advanced settings should not be needed, but are shown in Step 3 if it does not connect as it should.
    image of Quick Setup

  3. On the WAN IP Address page configure as follows:
    1. Under #1 select PPPoE and verify that PPP Auto Connect is selected.
    2. Under #2 enter your DSL PPP username and password provided by OympusNet.
    3. Under #3 verify that Dynamic IP-DHCP(Default) is selected.
    4. Under #4 verify that Dynamic DNS Addresses(Default) is selected.
    5. Under #5 verify that LLC Bridged is selected.
    6. Under #6 click the Apply button.
      image of M1000 Config

    7. Your DSL is ready when the Internet LED turns green.