Actiontec GT701

Modem Setup

  1. After the computer is connected to the Actiontec GT701 DSL modem, open a Web browser (e.g., Internet Explorer, Firefox) and enter in the Address field. Press Enter/Return on the keyboard.
    image of Browser

  2. Click the Advanced Setup tab, then select WAN IP Address from the navigation menu on the left. Click Yes to proceed.
    image of Advanced Setup

  3. Configure the following:
    1. Under #1 select PPPoE and check the box PPP Auto Connnect.
    2. Under #2 enter your username and password.
    3. Under #3 verify that Dynamic IP-DHCP(Default) is selected
    4. Under #4 verify that Dynamic DNS Addresses(Default) is selected.
    5. Under #5 select ATM Encapsulation type.
    6. Under #6 click the Apply button.
      image of GT701 Config

    7. Your DSL is ready to use when the Internet LED turns green.